Gate Controllers All our gate controllers are manufactured by Prastel S.p.A. in Italy. The UNIK range of controllers is a microprocessor controlled electronic panel designed for the management of automatic gate openers, overhead swing or sectional door, shutter and industrial doors. Equipped with a "flash" 32k-8 bit microprocessor, the UNIK control unit is capable of automating one or two 12vDC, 24vDC or 230vAC motor powered gate with or self learning limit settings and fine adjustment via on board trimmers. 
The UNIK line, developed to manage most automation features: quick self-learning programming, in which the unit automatically runs the manoeuvre-time learning manoeuvre, fixing the beginning of the slow-down point for both opening and closing at around 85% of the manoeuvre. professional programming allows installers to fix the wing slow-down point , enabling pedestrian access via radio, safety devices trigger mode. MAIN CHARACTERISTICS Automation Control Unit with 1 or 2 12/24 VDC or 230 VAC motors Professionally detachable terminal board Dual input for open/close limit switch Charging for 12 V buffer battery (max 7A) Input for solar panel power supply Expansion for 12V 15W electric lock (optional ELC) Expansion for courtesy light (optional ELC) Softstart for 12 V line (slow motor startup) Starting peak for 230 VAC motors built-in 433.92 MHz rolling-code receiver, 180 codes EASYROLL radio system On-board Flash reprogrammable microprocessor reprogrammable via serial interface Connector for programming, testing and reading unit log via GTSYSTEM terminal Encoder management (late july 2006) Logic and Functions settable from DIP-SWITCH (initial set-up) Operating Logic: step by step, step by step with automatic closure automatic Safety Auto-Test Flashing light mode Rapid re-closure upon clearing of photocell Output for electric lock release Assignment of radio control key function, total and partial (pedestrian) opening. Signal and Status LEDs LED indicator for learning status and radio code programming programming error LED status LED for photocells and Stop Gate status LED (Open Closed) and mains presence Adjustable Functions and Activation of Extra Functions Motor speed set via trimmer between 50-100%. Pause time adjustable via trimmer between 0 and 60 seconds. Obstacle detection trigger time adjustable via trimmer between 0.1 and 3.0 seconds. Partial (pedestrian) opening customised in learning phase Work times in opening and closure customised in learning phase Slow-down times in opening and closure customised in learning phase Slow-down speed in opening and closure set in learning phase Maximum Force RFCฎ activation function with Transmitter (in/out emergency). |
